Idaho Laboratories Corporation > Alternate Designs (Heavy Wall & Dual Wall)    

Products Offered

Information Index

Contact Information

Address:

2101 Hemmert Avenue

Idaho Falls, Idaho 83401

 


 




  
This page describes some of the other, less common designs we carry.  If you have a design in mind, please contact us to discuss the possibilities.  We are here to help you!  Other designs can be accessed at the links below.
 
Alternate Designs (when the normal material is just not enough) 
Heavy Wall - the sheath material is thicker (~2X) than our Standard material. This allows you to weld to the sheath material with less risk of burning through the side of the probe.
 
Dual Wall - this design has 2 separate sheath materials. You can choose either the same material for both sheaths, or go with a composite design in some cases. For some alloys, this is the only option available. Though exact dimensions for this design depend upon the sheath material desired, it is usually thicker than the Heavy Wall design below.
 

Alternate Designs

Diam.

HEAVY Wall

EQUAL Wall

Wall

2 wire

4 wire

Wall

2 wire

4 wire

.500'' 

.120''

.069''

.055''

.080''

.080''

.074''

.375''

.090''

.052''

.041''

.060''

.060''

.056''

.313''

.075''

.043''

.034''

.050''

.050''

.046''

.250''

.060''

.035''

.028''

.040''

.040''

.037''

.188''

.045''

.026'' 

.021''

.030''

.030'' 

.028''

.125''

.030''

.017''

.014''

.020''

.020''

.019''

.093''

.023''

.013'' 

.010''

.014''

.014''

.013''

.063'' 

.015''

.009''

  

.010''

.010''

.009''

.040''

  

  

    

.006''

.006''

.006''

.032''

 

  

 

.005''

.005''

.020''

 

  

  

.003''

.003''

 

 *Dimensions for Dual Wall depend on sheath material required. Please contact us with your specific requirements.

We offer MI cable with a Haynes Alloy HR160 outer sheath. This material is usually made in Type K or N, and has the dimensions below.

Diam.

HR160 Outer Sheath

Inconel 600 Liner

Tolerance

Wire Diameter

Insulation

2 wire

4 wire

2 wire

4 wire

.125''

.018''

.008''

+/-.002''

.019''

.016''

.012''

.011''

.188''

.027''

.011''

+/-.002''

.030''

.024''

.017''

.016''

.236''

.033''

.014''

+/-.002''

.037''

.030''

.022''

.020''

.250''

.035''

.015''

+/-.002''

.040''

.032''

.023''

.021''

.313''

.044''

.019''

+.002''/-.003''

.049''

.039''

.029''

.026''

.375''

.053''

.023''

+/-.003''

.059''

.047''

.035''

.032''

.500''

.071''

.030''

+/-.003''

.078''

.063''

.047''

.042''